Search → Understand → Confirm specification → Engineering review → RFQ
Selection / Gas Sensing
Multi-Wavelength Combiner for Gas Sensing — selection guide

Multi-Wavelength Combiner for Gas Sensing

Short answer Use an N×1 combiner, model 063, to bring several laser wavelengths into one fiber when they arrive at different times. One fused coupler cannot cover 760–1742 nm: the widest catalog window is 1260–1650 nm, so split the range by window. Wavelengths, fiber, and connectors are confirmed per configuration.

Gas analyzers built on TDLAS or OA-ICOS read one wavelength at a time. Each laser is switched on in turn, so the wavelengths never overlap in the fiber. That time separation is what lets one combiner path serve all of them, provided the fiber geometry and the connector match. This page compares the combiner path, the fused-coupler path, and splitting by window.

Side by side

063 · N×1 combinerFused couplerSplit by window
What it doesBrings several inputs into one output fiberSplits or combines light inside one wavelength windowGives each window its own device
Wavelength coverage800–1000 nm standard; other sets by custom reviewOne window: ±40 nm, three fixed windows, or 1260–1650 nmAny range, window by window
Fiber105/125 µm, 0.22 NA on the 3×1 build; other fibers on requestSMF-28e+ single-mode, or 50/125 and 62.5/125 multimodeMatched per window
Best fitTime-separated wavelengths into one fiberOne window with a fixed splitRanges wider than one window, such as 760–1742 nm

This table compares functions, not guaranteed specifications. Confirm the selected configuration with engineering.

Window limits

A fused coupler is built around one window. The wideband coupler, model 094, holds ±40 nm around 1310 nm or 1550 nm. The triple-window coupler, model 099, holds three fixed windows — 1310, 1490, and 1550 nm — at ±20 nm each. The all-band coupler, model 098, covers 1260–1650 nm, the widest catalog window.

760 nm sits below that floor, and 1742 nm sits above its ceiling, so no single catalog coupler covers 760–1742 nm. The multimode coupler, model 090, works at 850 nm, 1310 nm, or both windows, at ±40 nm each. The window rule is the same. To cover the full range, split it by window and give each window the device built for it.

The combiner side follows a different rule. The N×1 combiner, model 063, is specified for the 800–1000 nm pump band, with 105/125 µm, 0.22 NA pump fiber on the 3×1 build. Wavelength sets outside that band are reviewed as custom configurations: the wavelength set, the fiber, and the package are confirmed together before quotation.

What to confirm before quotation

  • Wavelength list. Every wavelength the analyzer uses, and whether they run at different times.
  • Fiber. The fiber type and core size on each input, and the output fiber the analyzer expects.
  • Connectors. The connector on each pigtail — for example FA/APC or FC/APC.
  • Port count and quantity. How many inputs the combiner must accept, and how many units the build covers.

Questions

Can one combiner carry several wavelengths into a single fiber?

Yes, when the wavelengths arrive at different times and the fiber geometry fits. Send the wavelength list, the fiber type, and the connector. Wavelength sets outside the standard 800–1000 nm pump band are reviewed as a custom configuration.

Can one fused coupler cover 760 to 1742 nm?

No. A fused coupler is built for one window. The widest catalog window is 1260–1650 nm, which leaves out both 760 nm and 1742 nm. Covering the full range means splitting it by window, with one device per window.

What fiber and connector details do you need for a quotation?

The wavelength list, the fiber type and core size, the connector type — for example FA/APC or FC/APC — the port count, and the quantity. Engineering confirms the configuration before quotation.

What quantity and lead time should I plan for?

Minimum quantity depends on the confirmed configuration. Prototypes are paid. Lead time depends on the configuration and is confirmed in the quotation once the fiber is accepted.

Require a Custom High-Power Optical Solution?

Engineering still starts from the same set of conditions.